A wide variety of configurations provided the right combination of price and performance for any industrial Hi or Low Bay application. Both white and specular reflectors, with and without optional louver, are available to meet the exact needs of your project be it a big box retailer, sport facility, manufacturing area, warehouse aisle, large storage room, or gymnasium.
Housing, ends, and socket supports are formed of code gauge cold rolled steel.
For 1, 2, 3, or 4 lamp 32W T8, 40/50/55W Biax, or 54W T5 HOLamps. Fully electronic, parallel instant start, high power factor, minimum .88 NLO Ballast Factor (BF), THD < 20%, for 120V 60 Hz operation. MV (120v/277v) and 277v-480v available.
Unlike HID lamps, Fluorescent lamps have no warm-up period and re-strike instantly.
Program start (PS), LLO (BF < .85), HLO (BF > .90), Multiple ballast for two circuit switching of lamps, 0 deg, -20 Deg cold weather, 40 deg C high ambient, dimming, emergency power packs, CEE Qualified, and other lamp and ballast types can be used.
Straight blade baffle louvers (white or specular aluminum) are optional. Reflector assembly consists of a highly specular 88% or 95% aluminum formed into a computer designed optical system, configured to tailor distribution and maximize the output efficiencies of lamps.
For narrow isle light distribution - highly specular 95% reflective, low iridescent, anodized material is recommended. For general lighting, a wide distribution high reflectance 92%+ white reflector is optionally available. All fixture metal parts other than the reflectors are finished in high-reflectance baked on white polyester enamel.
Omni-directional and linear pattern, low bay and high bay, motion sensors are optionally available. For more information on integrating motion sensors and emergency lighting into these products, refer to the » Motion Sensor equipped luminaries area of our site.
Complies with City of New York Requirements. Can be configured to meet Federal/State/Local/ and Utility Rebate Program Requirements.
Extras:
Once you are viewing a PDF page in your browser, you can save it to your computer, Print it out, or attached it to an Email.
 » Catalog / Data Page - View, Save, or Print (PDF)
For photometric information on this product please » Contact Crownlite
|
Please Note:
- Fixtures are U.L. listed and l.B.E.W. Union made.
- Many fixtures can be configured to meet Federal/State/Local/ and Utility Rebate Program Requirements.
- Units can be manufactured in a variety of materials like steel, aluminum, or extruded aluminum, and may include: customized reflectors/shielding, special mounting, ballasting, and lamping arrangements, self contained emergency lighting, motion sensors, and many other options and accessories. If this is not the exact item or configuration you need, Please
» Contact Crownlite.
- Information supplied may change without notice. Consult factory for verification, samples, and minimum quantities.
|
|
